Tire Changer Power Unit

The Tire Changer Power Unit consists of three hydraulic circuits which respectively control three double action cylinders.The application of the none-loading valve function and the aluminium AC motor fosters the long operating cycle and high reliability of the power unit. As an ideal hydraulic source for the system of multi-cylinder operated separately, this series Tire Changer Power Unit is widely used in big tyre changer.
When you use Tire Changer Power Pack, you have five areas that need attention. Clean all the hydraulic parts concerned before mounting the power unit.
1.Viscosity of the oil should be 15-68 cst.
2.This power unit should be mounted horizontally.
3.Check the oil level in the tank after the first start of the power unit.
4.Change the oil after the first 100 hours of using the power unit,then change the oil every 3000 hours.

Snow Plows Power Units

Snow Plows Power Units with built-in 12 volt DC solenoid valves for operating snow plows. Provides power up, hold and gravity down for single acting cylinder blade lift plus left and right control for two single acting cylinders or one double acting cylinder for blade angle. Snow Plows Power Units Features include heavy duty 12 volt motor, 12 volt directional control valves, adjustable main relief valve, plastic reservoir, check valves for load holding and adjustable cross-over relief valves on power angle circuit. Horizontal mount. Snow Plows Power Units Include reservoir breather and 12 volt DC motor solenoid.

Tipper Power Unit

Tipper Power Unit equips with a high pressure gear pump,a DC motor,a multifunctional manifold,valves and a tank,ect. Tipper Power Unit has a power up gravity down circuit. Start the motor to lift the machine and the lowing movement is activated by the solenoid valve with the lowering speed controlled by the pressure compensated flow control valve. Products of this series are widely used in the industry of logistic devices such as automotive, garden machinery, ect.
Model： HPP-F2.7B2A61/2
Motor Voltage ：24VDC
Power：2 KW
Pump Displacement ：2.7 ml/r
System Pressure ：20MPa
Tank Capacity ：6L
L(mm)：550