Tire Changer Power Unit

The Tire Changer Power Unit consists of three hydraulic circuits which respectively control three double action cylinders.The application of the none-loading valve function and the aluminium AC motor fosters the long operating cycle and high reliability of the power unit. As an ideal hydraulic source for the system of multi-cylinder operated separately, this series Tire Changer Power Unit is widely used in big tyre changer.
When you use Tire Changer Power Pack, you have five areas that need attention. Clean all the hydraulic parts concerned before mounting the power unit.
1.Viscosity of the oil should be 15-68 cst.
2.This power unit should be mounted horizontally.
3.Check the oil level in the tank after the first start of the power unit.
4.Change the oil after the first 100 hours of using the power unit,then change the oil every 3000 hours.

Snow Plows Power Units

Snow Plows Power Units with built-in 12 volt DC solenoid valves for operating snow plows. Provides power up, hold and gravity down for single acting cylinder blade lift plus left and right control for two single acting cylinders or one double acting cylinder for blade angle. Snow Plows Power Units Features include heavy duty 12 volt motor, 12 volt directional control valves, adjustable main relief valve, plastic reservoir, check valves for load holding and adjustable cross-over relief valves on power angle circuit. Horizontal mount. Snow Plows Power Units Include reservoir breather and 12 volt DC motor solenoid.

Tipper Power Unit

Tipper Power Unit equips with a high pressure gear pump,a DC motor,a multifunctional manifold,valves and a tank,ect. Tipper Power Unit has a power up gravity down circuit. Start the motor to lift the machine and the lowing movement is activated by the solenoid valve with the lowering speed controlled by the pressure compensated flow control valve. Products of this series are widely used in the industry of logistic devices such as automotive, garden machinery, ect.
Model： HPP-F2.7B2A61/2
Motor Voltage ：24VDC
Power：2 KW
Pump Displacement ：2.7 ml/r
System Pressure ：20MPa
Tank Capacity ：6L
L(mm)：550

Dump Truck Hydraulic Power units

Dumping Truck Covering Power Units are a hydraulic power unit especially designed for dump truck modifications. In order to prevent materials from leaking or spilling, a dumping Truck Covering Power units are usually mounted with a special system. To put it simply, it is to put a cover on the rear cargo-box of dump trucks, thus achieving a fully enclosed cargo-box. Dumping Truck Covering Power units function to provide power for this special system. Meanwhile, Dumping Truck Covering Power Pack is also applicable for van trucks and some other heavy duty vehicles. 

Model  :  HPP-F1.6A2A7/1

Motor Voltage : 24VDC

Power : 2KW

Pump Displacement : 1.6ml/r

System Pressure : 19MPa

Tank Capacity : 3L

Solenoid Valve Volt :24VDC

Snow plows power unit

Snow plows power unit as its name suggests, is designed for snow sweepers, of course, it is also applicable for various other similar vehicles. Our snow plows power unit is manufactured with one or more three-position four-way solenoid check valves to control cylinder operation. An inbuilt throttling valve is available at the oil return port, which keeps the hydraulic device descending steadily and at a constant speed. This design also provides our hydraulic power unit with good pressure maintaining performance,simple operation and convenient maintenance.

Model: HPP-F2.1Y1W14/3,HPP-F2.1Z1W14/3

Motor Voltage:  12V

Power: 1.5KW

Pump Displacement:  2.1ml/r

System Pressure:  13MPa

Pressure of Bi-Directional Relief Valve:  18MPa 

Tank Capacity: 1.5L ,  2L 

Solenoid Valve Volt :  12V

Length :  384mm,440mm

Tipper Power Unit

Tipper Power Unit consists of high pressure gear pump, motor, multi-manifold, hydraulic valves, tanks, wired controller and other components combine as a whole, is a typical power rise, power down the hydraulic circuit。Tipper Power Unit  is widely used in small dump trucks, hydraulic winch.
Model： HPP-F2.1B1W61/2
Motor Voltage：12VDC
Power：1.5KW
Pump Displacement：2.1ml/r
System Pressure：20MPa
Tank Capacity：5L
L(mm)：500

Fork Lift Power Units

Hydraulic Power Unit including Fork Lift Power Units,Fork Lift Power Units consists of high pressure gear pump, motor, multi-manifold, hydraulic valves, fuel tank and other parts combine into one, the Department of the typical power rise, fall gravity hydraulic circuit. Starting motor to achieve increased; opens the solenoid valve to achieve decrease, the speed automatically controlled by a built-balancing valve. This series is all kinds of forklift trucks, lifting platform ideal power source for small devices such as the logistics.